Van Medevoort Audio vM PHM4
The Van Medevoort PHM4 stereo phone pre amplifier from the Module Series is built with very fast
discrete input and line stages. Completely symmetrical and double differential designed with bi-polar semi
conductors. This handles the most optimal connection between phono cartridge and control amplifier, but
also a very musical reproduction quality for each kind of music. With as well jazz, pop and classical this
results in a most realistic dynamics, focus and spaciousness. Input impedance and amplification are
settable by gold plated jumpers. The housing is extremely strong built with a nice finish. Internally
provided with a stabilized power supply for direct connecting to the mains. Standard delivered with a vM
SC 3P150 Silver Cable mains cable.
Features
- stereo phono pre amplifier
- for MM and MC cartridges
- switchable gain
- impedance input switchable
- excellent transient response
- very musical performance
- extreme low distortion
- audiophile components
- special film capacitors
- vM Silver Wire wiring
- gold plated relays contacts
- black structure finish, front plate silver
Cena
26000 Kč |
Parametry
Amp channels | 2 |
Input impedance MC / MM | 100-1000 Ohms* / 47kOhms |
Input voltage | 0.3 mV / 3.0 mV – 1 kHz |
RIAA control | < 0.3 dB |
Signal / noise ratio | -83 dB / -93 dB |
Bandwidth | 6 Hz – 50 kHz |
Channel separation | > 91 dB |
Gain | 60 dB / 40 dB – 1 kHz |
Subsonic filter | 6 Hz / -3 dB |
Power supply | 230 Volt / 50 Hz |
Housing | aluminum and steel |
Finish | black / silver |
Weight | 1.5 kg |
Dimensions w x h x d | 100 x 50 x 300 mm |